1125 N. Charles Street Plaza Completion Manual
Catalog Number: ZDCLINK300SS
Type:
Submitted by District Lighting Group
Job Name: 1111/1125 N CHARLES STREET AGORA ASI 51 Architect: Rohrer Studios (Baltimore) Engineer: BKMA Engineering (BALTIMORE)
1B
Notes:
DLG17-10877
ZDC link SPECIFICATIONS
Output
300 Watt
Power
120 volts 60hz
Input Primary
2.68
Input Amperage Primary
14VAC
Output Voltage secondary
15V
Maximum open circuit volts
2
Class
Ambient Operating Temperture 0°F to 140°F
Communication Preinstalled 8" RJ-11 communi- cation cable between facepack (i.e. user interface) and chassis (i.e. power unit). 10’ RJ-11 cable included in shipment for remote mounting option. Specify face- pack mount accessory for clean installation. App Control Network module required. Specify LAN accessory or Wi-Fi accessory depending on site needs. “FX Luxor” app available for iOS and Android devices. Control via app available for onsite adjustability.
Compatible devices Only fixtures or devices with ZD or ZDC Technology™ are compatible with the ZDC link. Devices have varying levels of control, including: 1) zoning, 2) zoning/dimming, or 3) zoning/ dimming/color. Mix and match fixtures and devices with varying levels of control technology on a single system. Fixture Assignment Assign fixtures to zone number manually via assignment ports on facepack or wirelessly via light assignment module (specify LAM and network accessories separately). water-resistant power cord with integrally molded plug; 5-foot length. Standard low voltage lighting wire required (e.g. 12-2, 10-2, etc.) between controller and fixtures. No additional communication wire is required. Wiring Heavy-gauge, grounded,
Holm Holm. Born from an industry demand for a comprehensive offering of distinctive line and low voltage lighting fixtures for the commercial market. Our products are designed to meet required specifications while echoing the aesthetics of the project. Holm is a Hunter Industries company with more than three decades of engineering expertise, now bringing its Luxor ® technology to the commercial architectural and landscape lighting market. Materials 304 stainless steel outer box and latch. Programming Create up to 250 independently adjustable lighting zones. Control each zone independently with separate on/off times, various
Sustainability Innovation meets conservation in the design and manufacturing of our products. Where we can, we use recycled materials while maintaining the highest quality and functionality. Our LED products provide high quality light at optimal energy efficiency, lifespan, and durability. Installation Requirements Designed for installation on a vertical surface in the upright position only.
Warranty 5-year limited warranty.
Power Input: 120VAC 60Hz. Output: 14VAC.
Listings
Finish Standard stainless steel finish.
intensities (1-100% in 1% increments) and 30,000 color options.
Weight 23.1 lbs.
Hardware Two 1-1/2" pan head machined mounting screws with plastic anchors. Stainless steel mounting brackets attached to transformer box.
More product resources available at holmlighting.com
Customer Service 1-844-200-4656
Index Page
Made with FlippingBook - Online catalogs